Wednesday, January 17, 2024

User Manual - Konnwei KW902 OBD2 ELM327 V1.5 PIC18f25k80



Description

The dongle usually can work on most new car with OBD2 16pin Aadapter and 12V engine since it is compatible with 12V 16 Pin vehicles. In general, OBD2 is used as a general term and can mean any of the following: 
1. OBD II (California ARB)
2. EOBD (European OBD)
3. JOBD (Japanese OBD)

For details, check The supported protocols section. Depending on which protocol, the retrieved data might be less or more. For the sake of users, it r
eads diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).

- ELM327 Will work with 12 V gasoline and diesel vehicles . Not support 24 v diesel /trucks.

it supports ALL OBDII protocols, widest coverages. See supported brands and models in the Supported Vehicles section.

 No wires or batteries (adapter is powered by the 12V Vehicles battery).

30 Minutes without communication, it will automatically go to sleep mode.

Ultra low cumsumption in sleep-mode, less than 10MA.

The adapter uses the fast communication mode and most reliable PIC18F25K80 chips, up to 30PID/S.

True ON-OFF button, you can press button to turn off the elm if not in use.


Specs

Brand Name: KONNWEI
- Voltage:12v
- Microchip: PIC18F25K80
- Certification: FCC,CE,BQB
- Software Update: Yes
- Features: 4mhz and support commands ATAL and ATPPS
- Product vehicles: Support OBD II car models
- Hardware Version: ELM327 V1.5
- Language: English
- Operating Voltage: 9-16 V 
- Working current: 16mA 
- Operating environment: -40-80*C 
- Storage temperature: ˜30-80*C 
- Product Weight: 33g


Chipsets

The original Konnwei will have the PIC18F25K80 chip with 16 legs.

The clone version may have different microchip. See the red highlight in the below image. It has a 14 leg chip which is something else.




Features

1. Read diagnostic trouble codes, both generic and manufacturer specific

2. Clear trouble codes and turn off the MIL ("Check Engine" light)

3. Display current sensor data, including:

4. Engine RPM

5. Calculated Load Value

6. Coolant Temperature

7. Fuel System Status

8. Vehicle Speed

9. Short Term Fuel Trim

10. Long Term Fuel Trim

11. Intake Manifold Pressure

12. Timing Advance

13. Intake Air Temperature

14. Air Flow Rate

15. Absolute Throttle Position

16. Oxygen sensor voltages/associated short term fuel trims

17. Fuel System status

18. Fuel Pressure

13.Intake Air Temperature

14.Air Flow Rate

15.Absolute Throttle Position

16.Oxygen sensor voltages/associated short term fuel trims

17.Fuel System status

18.Fuel Pressure


Supported ODB protocol

1. SAE J1850 PWM(41.6Kbaud)

2. SAE J1850 VPW(10.4Kbaud)

3. SAE J1939 CAN(29bit ID,250*Kbaud)
4.ISO9141-2(5 baud init,10.4Kbaud)
5.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
6.ISO14230-4 KWP(fast init,10.4 Kbaud)
7.ISO15765-4 CAN(11bit ID,500 Kbaud)
8.ISO15765-4 CAN(29bit ID,500 Kbaud)
9.ISO15765-4 CAN(11bit ID,250 Kbaud)
10.ISO15765-4 CAN(29bit ID,250 Kbaud)

B.USER1 CAN(11*bit ID,125*Kbaud)
C.USER2 CAN(11*bit ID,50*kbaud)

(*): default settings (user adjustable). See https://www.konnwei.com/product/447.html.

NB: The red highlights are not supported in ELM327 V2.1 but V1.5.


Supported cars (brands and models)

Notice : No ELM327 can work for all cars , most of the following car will fit . If the device does not fit for your car , please try to test on another car.


Notice : No ELM327 can work for all cars , most of the following car will fit . If the device does not fit for your car , please try to test on another car.

KW902 ELM 327 OBD2 Scanner Work as ICAR2 Adapter OBDII Diagnostic Tool

1. America Car List: (include Brazil)

Need standard OBD2 , and release from 2000 years to now. Including

- Chrysler, Ford, GM, Jeep


2. Europe Car List:

Need standard OBD2 , and release from 2003 years to now. Including

- Alfa Romeo, SAAB , Acura , Opel, Audi, Seat , Peugeot, Renault

- Bentley, Skoda, Daewoo, Benz, Daihatsu , Land Rover

- BMW, Vauxhall, Citroen, Volvo, Fiat, VW, Ford, Jaguar


3. Asia Car List: (include Australia)

Japanese car  Need standard OBD2 , and release from 2006 years to now. Including:

- KIA ,Isuzu, Honda, Mitsubishi, Hyundai , Dacia , Lexus, Mazda

- Nissan , Subaru, Suzuki, Toyota


Chinese car Need standard OBD2,  and release from 2011 years to now. Including

- BYD, Chery, Geely, Great Wall, Karry


4. Russia Car List:

For Ssangyong Actyon , A200 XDI Diesel , from 2007 to 2017 years ; 2.4 Diesel , from 2009 to 2017 years.

For Ssangyong Korando , 2.0 TD Diesel , from 2013 to 2017 years.

For Ssangyong Kyron , 2.0 Diesel , from 2007 to 2017 years.

For Ssangyong Rexton , 2.7 XVT Diesel , 2007 years or 2011 to 2017 years,

For Ssangyong Rodius , 2.7 Diesel , 2007 to 2017 years.

For LADA Niva , 1.7 Gasoline , from 2011 to 2017 years.

For LADA Priora , 1.5 Gasoline , from 2008 to 2017 years.


ODB port



Mobile Apps

⭐️ Car Scanner ELM OBD2


- iOS: https://apps.apple.com/no/app/car-scanner-elm-obd2/id1259933623

- Android: https://play.google.com/store/apps/details?id=com.ovz.carscanner


⭐️ Torque Lite (OBD2 & Car)


- iOS: 

- Android: https://play.google.com/store/apps/details?id=org.prowl.torquefree&hl=en&gl=US



PC Apps

⭐️ ScanMaster - ELM





BLE connection notes

1. Clear your BT connection history, find the Konnwei device , and connect it

     Password/Pari code is : 1234 or 0000

2. Open the software , and set it as the picture steps :

3. Click these two places of the picture, and wait for 30 seconds , it will connect successful .



No comments:

Post a Comment